Thunderpaws Posted March 1, 2020 Share Posted March 1, 2020 I quite fancy a go at doing my own Fuzz pedal, I’m sure it can’t be that hard!! Any suggestions? Using google gives me quite a few options: https://www.electrosmash.com/germanium-fuzz https://shop.pedalparts.co.uk/Fuzz/cat847125_2465698.aspx https://buildyourownclone.com https://www.bitsbox.co.uk/index.php?main_page=product_info&cPath=280_281&products_id=2033 https://www.jedspeds.co.uk/muffkits https://www.musikding.de/The-Face-69er-Fuzz-kit https://www.stewmac.com/Pickups_and_Electronics/Pedal_Kits_and_Parts/Pedal_Kits/JHS_Old_School_Fuzz_Pedal_Kit.html etc... Quote Link to comment Share on other sites More sharing options...
Kiwi Posted March 6, 2020 Share Posted March 6, 2020 Gosh, I'm a bit limited in that department. Good luck with it though. Quote Link to comment Share on other sites More sharing options...
Kirky Posted March 19, 2020 Share Posted March 19, 2020 The Musikding stuff is very good. Enjoy. Quote Link to comment Share on other sites More sharing options...
ezbass Posted March 19, 2020 Share Posted March 19, 2020 (edited) I’ve done it in the past, loads of fun and really satisfying. Unfortunately, the company I bought from are no more I think.. Edited March 19, 2020 by ezbass Quote Link to comment Share on other sites More sharing options...
Si600 Posted March 20, 2020 Share Posted March 20, 2020 @Jimothey made one over on BC. Knowing his level of lunacy and skill he probably designed it from scratch, mined and refined his own materials and then built something worthy of the best of the best boutique effects maker. 1 Quote Link to comment Share on other sites More sharing options...
Jimothey Posted March 20, 2020 Share Posted March 20, 2020 11 hours ago, Si600 said: @Jimothey made one over on BC. Knowing his level of lunacy and skill he probably designed it from scratch, mined and refined his own materials and then built something worthy of the best of the best boutique effects maker. I wish my electrical skills are that good!! I just bought a PCB off eBay and sourced the parts from Rapid Electronics and put it together with a few mods from the original spec Its a clone of the original DOD 250 Overdrive/Preamp @Si600 I’m not that bad am I? I just make questionable colour choices most of the time............ Quote Link to comment Share on other sites More sharing options...
muppetmat13 Posted May 14, 2020 Share Posted May 14, 2020 I've built a few before. I started with a TS808 Clone kit from GGG.com I then started using Tagboardeffects for vero-board layouts. Very rewarding work! Quote Link to comment Share on other sites More sharing options...
